Onkyo TX-SR876 - Manual (Page 132)

132
Zone 2 and Zone 3
—Continued
If you’ve connected your Zone 2 speakers to the AV
receiver, as explained in “Connecting Your Zone 2
Speakers Directly to the AV receiver” on page 130, you
must set the “Powered Zone2” setting to “Act” (Acti-
vated).
Notes:
• When “Act” is selected and Zone 2 turned on, the
Zone 2 speakers connected to the ZONE 2 L/R
speaker terminals output sound, but the surround back
speakers connected to the SURR BACK L/R speaker
terminals do not. When “Act” is selected and Zone 2
turned off, the surround back speakers output sound as
normal.
• Powered Zone 2 cannot be used if “Speaker Type:
Front(Speaker A)” is set to “Bi-Amp” or “BTL”, or
“Speaker Type: Front(Speaker B)” is set to “Normal”,
“Bi-Amp”, or “BTL” (page 61).
• This procedure can also be performed on the AV
receiver by using its [SETUP] button, arrow buttons,
and [ENTER] button.
Powered Zone2 Setting
1 Press the [RECEIVER] REMOTE
MODE button, followed by the
[SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
2 Use the Up and Down [ ]/[ ] but-
tons to select “7. Hardware
Setup”, and then press [ENTER].
The “Hardware Setup” menu appears.
INPUT SELECTOR
ON STANDBY
DISPLAY MUTING
GU IDE EXI T
PREV
CH
DIMMER
CDR/MD/DOCK
SAT TAPE/AMP
SLEEP
MACRO
REMOTE MODE
--/--- 10 11 12
TV
TV CH
TV VOL
PLAYLIST RANDOM
DVD
AUX 1 AUX 2 GAME/TV
CBL/SAT VCR/DVR
D. TUN
CD TUNER TAPE
PHONO
REC
ENTER
TO P M ENU MEN
U
VOL
CH
DISC
ALBUM
TV
VCR
CABLE NET/USB
DVD
RECEIVER
CD
+
-
1 2 3 ZONE 3
ZONE 2
INPUT
+
-
+10 0 CLEAR
1 2 3
4 5 6
7 8 9
SE TUP
RET UR N
NET/USB
SP A SP B
SETUP
RECEIVER
ENTER
3 Use the Up and Down [ ]/[ ] but-
tons to select “2. Zone2/Zone3”,
and then press [ENTER].
The “Zone2/Zone3” screen appears.
4 Use the Up and Down [ ]/[ ] but-
tons to select “Powered Zone2”,
and use the Left and Right
[
]/[ ] buttons to select:
Not Act: ZONE 2 L/R speaker termi-
nals not activated (Powered
Zone 2 disabled).
Act: ZONE 2 L/R speaker termi-
nals activated (Powered Zone
2 enabled).
5 Press the [SETUP] button.
Setup closes.
7-2. Zone2/Zone3
Powered Zone2
Zone2 Out
Zone3 Out Not Act
Fixed
Fixed
MOVE VALUE RETURN RETURN EXIT SETUP