Onkyo TX-SR876 - Manual (Page 62)

62
First Time Setup
—Continued
Note:
This procedure can also be performed on the AV receiver
by using its [SETUP] button, arrow buttons, and
[ENTER] button.
For the onscreen setup menus to display properly, you
must specify the TV system used in your area.
Note:
This procedure can also be performed on the AV receiver
by using its [SETUP] button, arrow buttons, and
[ENTER] button.
6 Use the Up and Down [ ]/[ ] but-
tons to select “Front(Speaker
B)”, and use the Left and Right
[
]/[ ] buttons to select:
Not Use:
Select this if you’re not using
Speakers B.
Normal:
Select this if you’ve connected your
front Speakers B normally.
Bi-Amp:
Select this if you’ve connected your
front Speakers B for bi-amped
operation.
BTL:
Select this if you’ve connected your
front Speakers B for bridged opera-
tion. The BTL indicator will appear
on the display.
Note:
“Bi-Amp” and “BTL” cannot be
selected if “Front(Speaker A)” is set to
“Bi-Amp” or “BTL”.
7 Press the [SETUP] button.
Setup closes.
TV Format Setup
(not North American models)
1 Press the [RECEIVER] button,
followed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
2 Use the Up and Down [ ]/[ ] but-
tons to select “6. Miscella-
neous”, and then press [ENTER].
The “Miscellaneous” menu appears.
3 Use the Up and Down [ ]/[ ] but-
tons to select “2. OSD Setup”,
and then press [ENTER].
The “OSD Setup” menu appears.
Note:
The “TV Format” (*) setting is not
available on the North American mod-
els.
4 Use the Up and Down [ ]/[ ] but-
tons to select “TV Format”, and
then use the Left and Right
[
]/[ ] buttons to select:
Auto: Select this to have the AV
receiver automatically detect
the TV system from the video
input signals.
NTSC: Select if the TV system in
your area is NTSC.
PAL: Select if the TV system in
your area is PAL.
5 Press the [SETUP] button.
Setup closes.
6. Miscellaneous
1. Volume Setup
2. OSD Setup
MOVE ENTER RETURN ENTER RETURN EXIT SETUP
6–2. OSD Setup
Immediate Display
Monitor Type
Display Position
TV Format
Language On
16 : 9
Bottom
Auto
English
MOVE VALUE RETURN RETURN EXIT SETUP