Bi-amping front speakers a, Connecting the av receiver —continued – Onkyo TX-SR876 User Manual

Page 27

Advertising
background image

27

Connecting the AV Receiver

—Continued

The FRONT L/R and SURR BACK L/R terminal posts
can be used with front Speakers A and surround back
speakers respectively, or bi-amped to provide separate
tweeter and woofer feeds for front Speakers A, providing
improved bass and treble performance.

• When bi-amping is used, the AV receiver is able to

drive up to 5.1 speakers in the main room.

• For bi-amping, the FRONT L/R terminal posts con-

nect to the front speakers’ tweeter terminals. And the
SURR BACK L/R terminal posts connect to the front
speakers’ woofer terminals.

• Once you’ve completed the bi-amping connections

shown below and turned on the AV receiver, you must
set the “Speaker Type: Front(Speaker A)” setting to
“Bi-Amp” to enable bi-amping (see page 61).

• When front Speakers A are biamped, front Speakers B

must be wired normally or not used.

Important:
• When making the bi-amping connections, be sure

to remove the jumper bars that link the speakers’
tweeter (high) and woofer (low) terminals.

• Bi-amping can only be used with speakers that support

bi-amping. Refer to your speaker manual.

Bi-amping Speaker Hookup

Bi-amping Front Speakers A

1

Connect the AV receiver’s FRONT R positive (+)
terminal to the right speaker’s positive (+) woofer
(low) terminal. And connect the AV receiver’s
FRONT R negative (–) terminal to the right
speaker’s negative (–) woofer (low) terminal.

2

Connect the AV receiver’s SURR BACK R posi-
tive (+) terminal to the right speaker’s positive (+)
tweeter (high) terminal. And connect the AV
receiver’s SURR BACK R negative (–) terminal
to the right speaker’s negative (–) tweeter (high)
terminal.

3

Connect the AV receiver’s FRONT L positive (+)
terminal to the left speaker’s positive (+) woofer
(low) terminal. And connect the AV receiver’s
FRONT L negative (–) terminal to the left
speaker’s negative (–) woofer (low) terminal.

4

Connect the AV receiver’s SURR BACK L posi-
tive (+) terminal to the left speaker’s positive (+)
tweeter (high) terminal. And connect the AV
receiver’s SURR BACK L negative (–) terminal to
the left speaker’s negative (–) tweeter (high) ter-
minal.

Woofer (low)

Right speaker

Left speaker

Tweeter (high)

Tweeter (high)

Woofer (low)

Advertising