Onkyo TX-SR876 - Manual (Page 134)

134
Zone 2 and Zone 3
—Continued
Selecting an Input Source for Zones
Notes:
• To select AM or FM, press the [TUNER] input selec-
tor button repeatedly. On the North American model,
you can also select XM or SIRIUS.
• Only analog input sources are output by the ZONE 2
PRE OUT, ZONE 3 PRE OUT and ZONE 2 L/R
speaker terminals. Digital input sources are not out-
put. If no sound is heard when an input source is
selected, check if it’s connected to an analog input.
• While Powered Zone 2 is being used, listening modes
that need surround back speakers (i.e., Dolby Digital
EX, DTS-ES, and THX Ultra2 Cinema) are unavail-
able.
• When Zone2 is on, Pure Audio cannot be selected.
• When Zone 2 is turned on, the output from the 12V
TRIGGER OUT ZONE 2 goes high (+12 volts).
• While Zone 2 or Zone 3 is on, the Auto Power On/
Standby and Direct Change functions do not
work.
• You cannot select different AM or FM radio stations
for your main room, Zone 2, and Zone 3. The same
AM/FM radio station will be heard in each room.
• On the North American model, you can select a differ-
ent radio source for each room. For example, XM for
your main room, SIRIUS for Zone 2, and AM/FM for
Zone 3.
Turning Off Zones
Note:
When Zone 2 is turned off, the output from the 12V
TRIGGER OUT ZONE 2 goes low (0 volts).
1
Remote
controller
AV receiver
On the remote controller, press
the [ZONE2] or [ZONE3] REMOTE
MODE button.
On the AV receiver, press the
[ZONE 2] or [ZONE 3] button.
The ZONE 2 or ZONE 3 indicator
flashes, and the input selector currently
selected for the zone appears on the dis-
play.
2
Remote
controller
or
AV receiver
On the remote controller, use the
INPUT SELECTOR buttons.
On the AV receiver, use the input
selector buttons, or press the
[ZONE 2] or [ZONE 3] button
repeatedly.
The input source is selected, the zone is
turned on, the name of the input selec-
tor appears on the display, and the
ZONE 2 or ZONE 3 indicator lights
continuously.
You can also use the AV receiver’s
INPUT SELECTOR buttons.
DVD
AUX 1 AUX 2 GAME/TV
CBL/SAT VCR/DVR
CD TUNER TAPE
PHONO
+10
1 2 3
4 5 6
7 8 9
0
NET/USB
1
Remote
controller
AV receiver
On the remote controller, press
the [ZONE2] or [ZONE3] REMOTE
MODE button.
On the AV receiver, press the
[ZONE 2] or [ZONE 3] button.
The ZONE 2 or ZONE 3 indicator
flashes.
2
Remote
controller
AV receiver
On the remote controller, press
the [STANDBY] button.
On the AV receiver, press the
[OFF] button.
The zone is turned off, and the ZONE 2
or ZONE 3 indicator goes off.