Omega Vehicle Security Wireless Sensor System zSeries - Manual (Page 39)

33 33
4.3 Coordinator’s Configurations and Operations
The Blue LED should blink for about 8 seconds and then stay on. It indicates that the
Coordinator is searching for the least noisy channel and starts listening there. That’s
when the blue LED changes from blinking to solid. Using a web browser, you should be
able to view the homepage.
• Start your web browser.
• From the browser you type http://zxxxx using the last four-digits from the MAC
address label located on the device if DHCP and DNS are used. If a static IP address
is used, then simply type http://x.x.x.x, where x.x.x.x is the Coordinator’s IP address.
• The Home Page, will be displayed.
Figure 4.5 Home Page Menu
In order to access certain menu items of the Home Page, users may be
prompted for a password, as shown in the two figures below.
Figure 4.6 LOGIN and ADMINISTRATOR Passwords
There are 2 different access levels:
1. ADMINISTRATOR Password (administrator) allows certain groups and individual users to
access and modify "entire" parameters without any restrictions.
The default password is 00000000. This password can be up to 16 alphanumeric case-
sensitive characters.
2. LOGIN Password (operator) allows users to access and modify all of the parameters,
except "Access Control" which requires an Administrator password.
The default password is 12345678. This password can be up to 16 alphanumeric
case-sensitive characters.
WIRELESS SENSORS HOME PAGE
Firmware Version x.x
HOME PAGE
http://192.168.1.200 Address
Readings
Diagnostic
Configuration
Chart
Sensor Setup
Access Control
ADMINISTRATOR
ADMINISTRATOR
LOGIN
LOGIN
http://192.168.1.200 http://192.168.1.200