Omega Vehicle Security Wireless Sensor System zSeries - Manual (Page 46)

4.3.4 Chart (continued)
Title: Coordinator’s name, assigned in "Configuration" page.
Save Current Graph: Save the current graph in PNG (Portable Network Graphics)
format. The filename has extension .png.
Max/Min Temperature: Maximum and minimum temperature of the current graph.
If a sensor is selected (trend line and sensor name turns bold), its most current
temperature reading is shown here.
Temperature Unit Drop-down List: Temperature unit to be used, either ºC or ºF.
Max/Min Humidity: Maximum and minimum humidity of the current graph.
If a sensor is selected (trend line and sensor name turns bold), it’s most current humidity
reading is shown here.
Max/Min Pressure: Maximum and minimum pressure of the current graph.
If a sensor is selected (trend line and sensor name turns bold), it’s most current pressure
reading is shown here.
Reading "Open" indicates that no sensing device is detected.
Pressure Unit Drop-down List: Pressure unit to be used.
P# button (Primary): P# shows the sensor name and controls the primary sensor
readings.
When clicked once,it turns bold, highlights primary sensor trend line and displays current
sensor readings.
when clicked twice, it turns white and the trend line will disappear.
When clicked again, it comes back to normal operation.
Chart Area: Display the trend lines of the sensors.
Range of temperature can be controlled by the upper and lower boxes on the left and
range of pressure can be controlled by the upper and lower boxes on the right.
S# button (Secondary): S# shows the sensor name, displays error messages [Lost/ID]
and controls the secondary (external) sensor readings.
When clicked once,it turns bold, highlights secondary sensor trend line and displays
current sensor readings.
When clicked twice, it turns white and the trend line will disappear.
When clicked again, it comes back to normal operation.
Applet Start Date and Time: Activates when the "Chart" page opens up.
X-axis Drop-down List: Time scale for the chart.
The chart area can be shown based on 1 min, 1 hour, 1 day, 1 week, 1 month, or 1 year
time intervals.
Last Update Date and Time: The last date and time when data arrived.
40