Omega Vehicle Security Wireless Sensor System zSeries - Manual (Page 53)

4.3.8 Access Control
This section describes the "Access Control" page of the Web interface. This page allows
the users to set up the network and security parameters of the zSeries wireless system.
At the initial entrance to the "Access Control" page you may be prompted for the LOGIN
Password (see Figure 4.6) prior to an ADMINISTRATOR Password.
Figure 4.18 Access Control
Login Password: This allows users to access and modify all of the zSeries Home Page
menu items, except "Access Control", which requires an Administrator password. The
default Login password is 12345678. This password can be up to 16 alpha-numeric
case-sensitive characters.
If there is no Login Password assigned (blank box) the zSeries system will not require a
password to access and modify zSeries Home page menu items.
Admin (administrator) Password: This allows users to access and modify the "Access
Control" page. The default password is 00000000. This password can be up to 16 alpha-
numeric case-sensitive characters.
If there is no Administrator Password assigned (blank box) the zSeries system will not
require password to access and modify "Access Control" page.
Host Name: Name of the server (DNS) max 16 characters, default is "z" and the last 4
digits of the MAC address. Refer to Section 3.4, DNS.
MAC Address: This is also called Hardware address or Ethernet address, which is
assigned to the Coordinator at production. The MAC (Media Access Control) address is
the Coordinator’s unique hardware number and is not changeable.
ACCESS CONTROL
ACCESS CONTROL
http://192.168.1.200 Address
Main Menu
Login Password 12345678
Admin Password 00000000
IP Address 192.168.1.200
Gateway Address 0.0.0.0
Subnet Mask 255.255.255.0
MAC Address 00:03:34:00:85:C4
Host Name z85C4
Save Reset
Network Reset
47