Introduction – Onkyo USR-5RF User Manual

Page 10

Advertising
background image

10

4. Slide the battery cover back on.

After a few seconds, the remote controller
starts up automatically and beeps twice to
indicate that it has finished starting up.

5. Plug the power adapter into a wallet

outlet and connect it to the
recharging dock.

Optional recharging dock

Warning:
Use the recharging dock only with the NiMH
rechargeable battery pack of BCC-5.

1. Slide the battery cover off the back of

the remote controller.

2. Remove the plastic AA battery tray

from the battery compartment.

Introduction

3. Insert the battery pack (included with

the recharging dock) as indicated on
the side of the battery pack.

6. Place the remote controller on the

recharging dock.

Recharging starts automatically. The light on
the front of the recharging dock indicates
charging takes place. When the battery pack
is fully charged, the light goes off.

Notes:

• You can operate the remote controller while it

is being charged.

• Normal charging time is 2 to 3 hours,

depending on the condition of the battery
pack.

When the battery pack is running low, the Low
Battery icon

blinks at the center top of the

display. Recharge the batteries as soon as possible
to ensure perfect performance.

Note:
The remote controller retains all settings when the
battery pack has run out. You will only have to
reset the clock.

Advertising