Onkyo USR-5RF - Manual (Page 29)

29
Getting the Maximum out of it
Restore
After you deleted a control panel button or a menu
item, the button or item is no longer visible in Use
mode but remains in the remote controller’s
memory. This allows you to restore it in Edit
mode.
Actions associated with direct-access or a Left/
Right buttons cannot be restored. You have to
reprogram them as explained in “Programming
Direct-access and Left/Right Buttons” on page
24.
Control panel buttons
1. Switch to Edit mode by using the
Mode button.
The deleted buttons become visible.
2. Complete instruction 3 to 7 in
“Programming control panel buttons”
on page 23.
The button is restored.
Device or Macro menu items
1. Make sure the device tab or macro
tab is active.
The device or macro tab is active while the
name of a device or macro is displayed.
2. Switch to Add mode by using the
Mode button.
3. Tap Restore Deleted Device or
Restore Deleted Group.
The deleted menu items become visible.
4. Tap the item you want to restore.
The item is restored and you return to Use
mode.
Note:
Only the macro group itself is restored, not the
macros it contained.