Onkyo USR-5RF - Manual (Page 26)

26
5. Tap Enter to save the changes and
return to the panel you were. -or-Tap
Cancel to return to the panel you
were without saving changes.
6. Label all other items you want and
return to Use mode via the Mode
button.
Labeling a menu item
1. Switch to Label mode by using the
Mode button.
2. Tap the device tab to open the Device
menu.
3. Touch and hold either the remote
controller’s Left or Right button and
tap the device you want to program.
Even when you want to program the currently
active device, you have to tap it in the Device
menu.
4. Complete instruction 4 to 6 in
“Labeling a button” on page 25.
Getting the Maximum out of it