Onkyo USR-5RF - Manual (Page 22)

22
To hide the Mode menu
To prevent accidental changes to the remote
controller interface and commands, you can hide
the Mode menu:
1. Make sure the remote controller is in
Use mode.
2. Touch and hold the remote controller
icon for a few seconds.
The first setup panel appears.
3. Scroll down to the second setup
panel.
4. Tap the Mode Menu button.
The mode menu icon is crossed out.
5. Tap .
The remote controller switches to Use mode.
The Mode button is no longer visible.
To switch to another mode
1. Tap the Mode button at the bottom of
the touchscreen.
The Mode menu pops up.
2. Tap the mode you want to use.
The label of the active mode appears on the
remote controller icon. You can now work in
the selected mode.
Note:
When a label is displayed, you can also display
the Mode menu by tapping the label.
Getting the Maximum out of it