Onkyo USR-5RF - Manual (Page 4)

4
Quick Start
Insert batteries
Insert 4 AA batteries according to the picture on
the inside of the battery compartment.
or
Use a rechargeable battery pack (sold separately).
(Remove the AA battery tray first). Before using
the remote controller, be sure to charge the battery
completely according to the instructions in the
manual.
Touch the screen to start
To turn on the screen, tap it gently with your
finger.
To use the touchscreen, simply tap the images
you see on the screen.
There’s no need to turn the screen off — it shuts
off automatically to save power.
Battery compartment
cover slides off
Be sure to read the manual for important
information about care and use of the
touchscreen.
Operate your components
Fresh out of the box, the remote controller is
already set up to work with popular components
made by Onkyo. Programming the remote
controller is easy: Add components to the Device
menu as necessary. Then, program the commands
to the remote controller for the components. For
instructions, refer to the manual.
1. Home
If you get lost, you can always go Home menu
screen. Just tap Home.
2. Tap name of component to display
component’s control panels.
1
2
4
3
3. You can also use the Device menu;
tap to display it.
4. Tap to scroll to next panel for this
component.