Onkyo USR-5RF - Manual (Page 9)

9
Introduction
2. Charging the Remote
Controller
2. Insert 4 AA batteries (included in
package) as indicated on the bottom
of the battery compartment.
3. Slide the battery cover back on.
After a few seconds, the remote controller
starts up automatically and beeps twice to
indicate that it is ready to use.
When batteries are running low, the Low Battery
icon
blinks at the center top of the display.
Replace the batteries as soon as possible to ensure
perfect performance.
Note:
The remote controller retains all settings when
batteries have run out or when you replace them.
You will only have to reset the clock.
AA batteries
1. Slide the battery cover off the back of
the remote controller.