Onkyo USR-5RF - Manual (Page 19)

19
Setting
Battery
Clock
Time
Day
LCD
LCD Light
Button Light
5. Adjust the Settings
Most of the remote controller’s features can be set
to your own needs.
1. Touch and hold the remote controller
icon for a few seconds.
The first setup panel appears. You can see the
second and third setup panel by using the
scroll buttons.
2. Tap the button of the setting you want
to adjust.
The button becomes black.
3. Use the Left and Right button to
adjust the setting.
Note:
Tap the Left and Right buttons are repeating
buttons; holding down one of these buttons will
increase or decrease a value repeatedly.
Getting Started
Function
Shows the battery level.
Turns the clock display on or off and
lets you set 12 or 24h time display.
Sets the clock.
Sets the day.
Sets how long the touchscreen stays
on.
Sets how long the backlight of the
touchscreen stays on.
Sets how long the backlight of the
direct-access and Left/Right buttons
stays on.
First setup panel
Adjusting
Tap the clock repeatedly.
Tap the time button and use the Left
and Right button.
Tap the day button and use the Left
and Right button.
Tap the LCD button and use the Left
and Right button.
Tap the LCD Light button and use
the Left and Right button.
Tap the Button Light button and use
the Left and Right button.