Onkyo USR-5RF - Manual (Page 43)

43
High-resolution (320 x 240) liquid crystal display (LCD) with contrast
control
Large touchscreen
Seven programmable direct-access buttons
Backlighting for LCD and direct-access buttons
Infrared sending and learning eyes
3-wire (RS232) serial port connector
Dynamic, animated interface
Editable macros (up to 255 commands per macro)
Total number of devices and macros limited only by memory
Database with RC codes to operate different brands
Operating distance of 10 meters (33 feet)
Learning frequency upto 56 KHz
Learning distance 5 cm (2 inch) up to 30 cm (1 foot)
Operating distance of approximately 20 meters depending on the surrounding
conditions
Band:418 MHz
Bandwidth: +/–100 kHz
16 Extender ID’s and 4 Channels
2 MB non-volatile flash memory (retains commands when batteries are not
present)
512 K SRAM
4 AA 1.5V batteries, or one 4,8V rechargeable battery pack
Approximately 6 months with typical use
Power on by tapping the touchscreen, power off automatically management
153.6 x 94.1 x 43.7 mm (6.0 x 3.7 x 1.7 inch)
0 ˚C to 50 ˚C (32 ˚F to 122 ˚F)
RS232 cable for PC connection
4 AA 1.5 V batteries
Remote controller recharge package BCC-5
RF Receiver RFR-5
Specifications
Hardware
Software
Infrared (IR)
Radio
frequency (RF)
Memory
Batteries
Battery life
Power management
Dimensions
Operating temperature
Accessories
Accessories
(Not included)