Onkyo USR-5RF - Manual (Page 20)

20
Getting Started
Third setup panel
This panel provides technical information about
your remote controller.
To exit Setup Mode
■ Tap the Setup label on the remote
controller icon.
Second setup panel
Setting
Level
Mode Menu
Touch
Button
Calibrate
Revert
Function
Turns the backlight always on or off
when activating the touchscreen.
Note: When you choose always off,
you can only activate the backlight
using the backlight button.
Hides or shows the Mode button.
Hiding the Mode button prevents
unwanted changes to stored
commands.
Adjusts or turns off the touchscreen
beep.
Adjusts or turns off the beep of Left/
Right and direct-access buttons.
Calibrates the touchscreen.
Reverts the remote controller to the
factory default configuration.
Adjusting
Always on: Tap the Level button and
position the indicator in the left half of
the indication bar using the Left
button.
Always off: Tap the Level button and
position the indicator in the right half
of the indication bar using the Right
button.
Tap the Mode Menu button.
Tap the Touch button repeatedly.
Tap Button repeatedly.
Tap the Calibrate button and follow the
on-screen instructions.
Tap the Revert button and follow the
on-screen instructions.