SINBO SBM 4711 - Manual (Page 29)

- 28 -
INGREDIENTS MEASUREMENTS
3. Ingredient sequence
The sequence of placing ingredients should be observed, generally speaking, the sequence is:
liquid ingredients, eggs, salt and milk powder etc. When placing the ingredients, the flour can't
be wet by liquid completely. The yeast can only be placed on the dry flour. Exclusively, yeast
can't touch with salt. If the auto adding ingredient function is used, after the flour has been
kneaded, fruit ingredients will be automatically poured into the mixture. When you use the
delaying function for a long time, never add the perishable ingredients such as eggs, fruit
ingredient.
TROUBLE SHOOTHING
Questions&Answers on Bread maker
PROBLEM: Smoke comes out of the baking compartment or of the vents
CAUSE: The ingredients stick to the baking compartment or on the outside of the baking pan
SOLUTION: Pull out the plug and clean the outside of the baking pan or the baking compartment.
PROBLEM: The bread goes down in the middle and is moist on the bottom
CAUSE: The bread is left too long in the pan after baking and warming.
SOLUTION: Take the bread out of the baking pan before the warming function is over.
PROBLEM: It is difficult to take the bread out of the baking pan.
CAUSE: The bottom of the loaf is stuck to the kneading blade
SOLUTION: Clean the kneading blade and shafts after the baking. If necessary, fill the baking
pan with warm water for 30 minutes, then the kneading blade can be easily removed and
cleaned.
PROBLEM: The ingredients are not mixed or the bread is not baked correctly
CAUSE: Incorrect program setting
SOLUTION: Check the selected menu and the other settings.
CAUSE: The START/STOP button was touched while the machine was working
SOLUTION: Do not use the ingredients and start over again
CAUSE: The lid opened several times while the machine was working
SOLUTION: Never open the lid frequently, otherwise it is necessary, such as add ingredients.
And make sure that lid was closed well after being opened.
CAUSE: Long blackout while the machine was working
SOLUTION: Do not use the ingredients and start over again.
CAUSE: The rotation of the kneading blade is blocked
SOLUTION: Check that the kneading blade is blocked by grains, etc. Pull out the baking pan and
check whether the drivers turn. If this is not the cae, send the appliance to the customer service.