SUUNTO Stinger - Manual (Page 27)

25
• the instrument displays correct temperature
and depth (0.0 m [0 ft])
• the buzzer beeps
• you have preset desired displays on the User
Definable Display Field
• the altitude and personal adjustment settings
are correct (Air and EAN modes)
And if set to EAN mode, make sure that:
• the oxygen percentage is adjusted according
to the measured Nitrox blend in your cylinder
• the oxygen partial pressure limit is set
correctly.
The Stinger is now ready for diving.
NOTE: The surface interval time does not run before
the first dive.
°C
SURF TIME
DIVE TIME
m
°C
SURF TIME
DIVE TIME
m
TIME
°C
SURF TIME
DIVE TIME
m
MAX
m
TIME
DIVE
Fig. 3.5. Startup IV. Free/Gauge mode. Depth and dive time
are zero. Pressing +/- button activates alternative display of
maximum depth and current time or dive number.
Fig. 3.4. Startup III. Surface mode
(Air). Depth and dive time are zero.
Pressing +/- button activates
alternative display of maximum
depth and current time.