SUUNTO Stinger - Manual (Page 74)

72
4.3. AIR AND ENRICHED AIR
NITROX SETTINGS [EAN]
In this setting mode you can either select one scuba dive
mode (standard air and enriched air nitrox) or disable
both. If you select ON then you have a choice of whether
to have either Standard Air or Enriched Air Nitrox as
the operating option.
If set to the EAN (Nitrox) mode, the correct oxygen
percentage of the gas in your cylinder must always be
entered into the computer to ensure correct nitrogen and
oxygen calculations. Also in EAN mode, the oxygen
partial pressure limit must be set. When in the EAN
Setting mode the equivalent allowed maximum depth
based on the chosen setting will also be displayed.
To set the Air/EAN:
1. In the Setting Mode, press S three (3) times to select
the EAN Setting Mode (Fig. 4.7.).
2. Wait two seconds until the EAN Setting Mode
activates automatically. The enable/disable status [On/
OFF] starts to blink on the display (Fig. 4.8.).
Fig. 4.7. EAN/Air Setting Mode.
Fig. 4.8 The enable/disable status
of the EAN Mode.