Dive numbering shown during dive planning – SUUNTO Stinger User Manual

Page 33

Advertising
background image

31

The Planning mode also accounts for the following

information from previous dives:

•

any calculated residual nitrogen

•

all dive history for the past four days

•

oxygen exposure (EAN mode)

The no-decompression times given for different depths

will therefore be shorter than before your first "fresh"

dive.

DIVE NUMBERING SHOWN DURING

DIVE PLANNING

Dives belong to the same repetitive dive series if the

instrument was still counting down the no-fly time at

the beginning of the dive.
The surface interval must be at least 5 minutes for a

dive to be considered a repetitive dive. Otherwise, it is

considered a continuation of the same dive. The dive

number will not change and the dive time will continue

where it left off (see chapter 3.2.3.3.).

Fig. 3.8. Dive Planning. The

Planning mode is indicated by

the PLAN text and mode

indicators.

Fig. 3.9. Planning. The no-

decompression time limit at 30.0

m [100 ft] is 18 minutes in P0/

A0 mode.

Advertising