SUUNTO Stinger User Manual
Page 82
80
5.1. LOGBOOK AND DIVE PROFILE
MEMORY [LOG]
This instrument has a very sophisticated high capacity
Logbook and Profile Memory. The data is recorded to
the profile memory based on the selected sampling rate.
Dives shorter than the recording interval are not
registered. You have the possibility to set the scuba
diving sampling rate to 10, 20, 30 or 60 seconds with
the optional PC-interface unit and software. The
sampling rate in the Free/Gauge mode can be set
separately to 2, 4, 10, 20, 30 or 60 seconds (see chapter
4.4.).
To enter the Logbook Memory Mode:
1. In the Memory Mode [MEM], press S to select the
Logbook Memory Mode (Fig. 5.2.). The LOG text
appears at the bottom of the display to indicate the
selected mode.
2. Wait two seconds until the Logbook Memory Mode
activates automatically. For each dive there are four
pages of logbook dive information.
3. Press S to switch the display between Logbook display
I, II, III and IV.
Fig. 5.4. Logbook, page II. Main
dive related data.
Fig. 5.3. Logbook, page I.