SUUNTO Stinger - Manual (Page 77)

75
4. After you have set the FREE, press the M button to
save the settings and to return to the Setting Mode
[SET].
NOTE: If both the Air/EAN and Free modes are
disabled (set to OFF), the instrument will not activate
any diving mode when submerged.
4.5. DIVE ALARM SETTINGS
[DIVE AL]
You can set one depth alarm in the Stinger. When the
depth alarm activates, the -symbol blinks as long as
the present depth value exceeds the adjusted value and
the alarm sounds for 24 seconds. Press any button to
stop the audible alarm, after it has activated.
To set the depth alarm:
1. In the Setting Mode [SET], press S five (5) times to
select the Dive Alarm Setting Mode (Fig. 4.12.).
2. Wait two seconds until the Dive Alarm Setting Mode
activates automatically. The alarm status [On/OFF]
starts to blink on the display (Fig. 4.13.).
Fig. 4.13. Dive Time Alarm.
Center window displays less than
5 minutes dive time.
Fig. 4.14. Dive Time Alarm.
Display when more than 5
minutes dive time left.