SUUNTO Stinger User Manual
Page 28
26
After activation of the Dive Mode or after diving, the Stinger will automatically
switch to show the time keeping display within 5 minutes to conserve the battery
power, if you do not press any buttons. However, the dive computer functions will
remain active until it has calculated that all residual nitrogen has off-gassed. This
may take up to 100 hours, as described in chapter 7.1. "Operating Principles".
However, SUUNTO recommends to turn on the Dive Mode before diving to check
the settings, battery warning, etc. and for dive planning.
3.1.2. BATTERY POWER INDICATOR AND LOW BATTERY
WARNING
This dive computer has a unique graphic Battery Power Indicator designed to give
you an advance notice of impending need to change the battery.
The Battery Power Indicator can always be seen as the Dive Mode is activated. The
electroluminescent backlight will be on during the battery check. The following
Table and Figure show the various warning levels.