Oki 4100 - Manual (Page 14)

English
14 Component Identification
Control Panel Keys and Indicators
1 LCD Display Panel: Refer to this display for
instructions and information while your fax machine is
performing operations or while you are programming.
2 Transmit Resolution/Yes ᮤ key: Use this
key to change the resolution used for transmitting
documents. Use STD for standard originals, FINE
and EX.FINE for detailed or small print originals,
and PHOTO for originals that include colours or
many shades of gray.
You will also use this key as the Yes ᮤ key when
making selections or to move your cursor while
programming.
3 Type of Original/No ᮣ key: Use this key to
select the document contrast after you load a docu-
ment for transmission. Use LIGHT for originals that
are too light, NORMAL for documents with good
contrast, and DARK for originals that are too dark.
You will also use this key as the No ᮣ key when
making selections or to move your cursor while
programming.
4 Auto Rec Key: Use this key to switch your fax
machine’s answering mode. The answering mode
controls how your fax machine answers incoming
calls and receives faxes. Your fax machine’s display
will always indicate your current selection. See
Setting the Answering Mode in the Installation
chapter for more information about the answering
modes available in your fax machine.
5 Hyphen Key: When programming One Touch
keys and Auto Dial telephone numbers, use this
key to tell your fax machine to wait for the outside
or international line to become available before it
proceeds with dialling the rest of the telephone
number. When programming the TSI/CSI (see page
26) or call back numbers into your fax machine, use
this key to enter a “+” symbol.
6 Search Key: The One Touch keys and Auto Dial
numbers can be programmed to have a name or
location ID associated with their telephone numbers.
Using this key by itself or in combination with the
numeric keypad, you can search for these numbers
alphabetically. You can also use the Search key to
search for unassigned One Touch keys and Auto
Dial numbers.
7 Hook/V. Request Key: Press this key to open a
telephone line for manual dialling. You will be able to
hear the dialling through your fax machine’s speaker.
If you have an optional telephone handset or external
telephone connected to your fax machine, you can
also use this key to initiate or answer a request for
voice communication. During a fax communication,
press this key to tell the operator at the other fax
machine that you want to talk to him or her at the
4100 Fax ENGLISH 15/1/97 9:37 am Page 14