Oki 4100 - Manual (Page 53)

English
Programming 53
Service Function Settings List
LONG DOC. SCAN: Normally, your fax machine will
not scan documents longer than 360 mm. When this
function is on, your fax machine will scan and trans-
mit documents of any length for up to one hour.
When using this feature, keep in mind that multiple
document mis-feeds will not be detected.
MDY/DMY: This function controls how your fax
machine displays and prints the date (month / day /
year or day / month / year).
TIME/DATE PRINT: This function controls how the
time and date are printed on the fax messages which
you transmit. Your fax machine can be set to not
print the time and date, to print it at the top the first
page only, or to print it at the top of every page.
TSI PRINT: When this function is on, the telephone
number of the fax machine sending you a fax message
is printed at the top of each page of the message.
NO TONER MEM. RX: When this function is turned
on, your fax machine will automatically receive mes-
sages in memory when it is low on toner.
TAD MODE: This function allows an answering
machine to operate on the same line as your fax
machine.
TEL/FAX SWITCH: When this function is on, the tele-
phone/fax [T/F] answering mode is available, which
allows your fax machine to automatically distinguish
between incoming voice and fax telephone calls.
MONITOR CONT.: This function controls the line
monitoring sounds you hear while your fax machine
is dialling and all fax communication sounds.
Available settings are on and off.
REAL TIME DIAL: This function controls how you
can dial telephone numbers on your fax machine.
Normally, your fax machine waits for you to enter
an entire telephone number and press Start before
dialling.
When this function is set to type 1, you can dial
immediately (digit by digit) whenever you pick up
the handset. When this function is set to type 2, you
can dial immediately whenever you pick up the
handset or press the Hook key. Available settings
are off, type 1 and type 2.
TONE FOR ECHO: This function compensates
for poor overseas line conditions. Available settings
are on and off.
MH ONLY: This function controls the type of
compression method your fax machine uses during
communication. Adjusting may also help in poor line
conditions. Available settings are on and off.
4100 Fax ENGLISH 15/1/97 9:37 am Page 53