Oki 4100 - Manual (Page 19)

Installation
English
Installation 19
Getting Started
To install your new fax machine, follow the instruc-
tions from Unpacking to Setting the Fax
Identification. You must complete these steps for
your fax machine to operate properly.
If you have purchased an option package for your
fax machine, refer to the documentation you
received with that option.
Where to Install Your Fax Machine
■ Install your fax machine in a dust-free location away
from direct sunlight.
■ Allow several inches on each side of the fax
machine to ensure adequate ventilation.
■ Make sure that both power and telephone outlets
are available nearby.
■ Choose a location where the relative humidity is
between 20% and 80%, and where the temperature
is between 10°C/50°F and 32°C/92°F.
Unpacking
Before you begin, be sure that all the items listed
below are included in your package. Remove the
contents from the carton and place them on a sturdy
surface.
■ Facsimile unit
■ Toner cartridge
■ Image drum unit (inside facsimile unit)
■ Power cord
■ Telephone line cord
■ Paper tray/Copy stacker
■ This handbook
Refer to the illustrations in the Component
Identification chapter.
Tip: A telephone handset, handset cradle and handset
cord may also be included. If any items are missing,
notify your dealer immediately for a replacement. Keep
your packing materials and carton in case you ever
need to ship or transport the machine.
4100 Fax ENGLISH 15/1/97 9:37 am Page 19