Oregon PowerScan Handheld Laser Scanner - Manual (Page 10)

4
PowerScan
®
Scanner
Software Verify that your scanner supports the desired interface 1 . The list below
indicates the interface groupings the scanner supports. Contact your
nearest PSC service depot if you don’t know your scanner’s group, or
need assistance to change the scanner to another interface group.
The Standard Keyboard Wedge/Wand Emulation/RS-232 Group
supports:
• I/F Type A - PC/XT w/Alternate Key Encoding
• I/F Type B - AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95
w/Alternate Key Encoding
• I/F Type C - PS/2 25 and 30 w/Alternate Key Encoding
• I/F Type D - PC/XT w/Standard Key Encoding
• I/F Type E - AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95
w/Standard Key Encoding
• I/F Type F - PS/2 25 and 30 w/Standard Key Encoding
• I/F Type H - IBM
®
3xxx w/102 keyboard
• I/F Type I - PS/555530T w/104 keyboard
• I/F Type J - NEC
®
9801 keyboard
• Wand Emulation
• RS-232
• WN
2
-RS-232 (SNI)
The IBM/RS-232 Group supports:
The Universal [Keyboard] Wedge Group:
• Consult the Universal Wedge Connectivity Guide
3
for more infor-
mation.
• For additional configuration/programming, refer to the Uni-
versal Wedge Programming Guide
3
.
1. Contact your dealer or sales representative if your desired interface is not listed. Interface group
definitions are subject to change without notice.
2. Wincor Nixdorf
®
(formally SNI)
• IBM Port 5B • IBM Port E
• IBM Port 9B • RS-232
• IBM Port 17 • WN-RS-232
3. Contact your dealer or visit the website listed on the back cover of this manual for publications.