Oregon PowerScan Handheld Laser Scanner - Manual (Page 123)

Programming Guide
117
No Second Fixed Length - configures the scanner to recognize
only the first fixed length.
Read Verification Read Verification is the number of times the scanner is required to read
the bar code data before sending the label data to the host.
Configuring
the Standard 2
of 5 Options
Use the special bar codes in this section to configure the Standard
2 of 5/IATA symbology options.
Check Digit
SET ------------------------------------------
Don’t Calculate ---------
Calculate ---------
Don’t Transmit ---------
Transmit ---------
END ------------------------------------------