Oregon PowerScan Handheld Laser Scanner - Manual (Page 27)

Programming Guide
21
Baud Rate Use the bar codes on this page to select the communications Baud Rate.
Only one Baud Rate selection may be active at any one time. The last
Baud Rate label you scan during a programming session will be the set-
ting that is stored when you scan the END label.
SET -------------------------------------------
Baud Rate = 1200 ---------
Baud Rate = 2400 ---------
Baud Rate = 4800 ---------
Baud Rate = 9600 ---------
Baud Rate = 19200 ---------
Baud Rate = 38400 ---------
END ------------------------------------------