Oregon PowerScan Handheld Laser Scanner - Manual (Page 57)

Programming Guide
51
5. Scan the END bar code.
You have added a two character suffix to all bar code data, regardless
of label symbology, that will be added to the label data before it is sent
to the host
.
NOTE
Successful programming of a suffix requires
4 digits.
NOTE
If you make a mistake or lose your place while
setting this option, scan the END bar code to
exit Programming Mode. The scanner will
sound a two-beep error tone to indicate that
programming was incomplete, and the setting
will remain as it was before entering Program-
ming Mode.
Setting Global Suffix(es)
SET -------------------------------------------
Set Suffix ---------
END ------------------------------------------