Omron W343-E1-07 - Manual (Page 150)

129
Using Socket Services with Socket Service Request Switches Section 6-2
turning OFF the Request Switch for the canceled process and turning of the
Close Request Switch, allowing time for the response code to be read.
Note The Open Flag will not turn ON at all if a close request is made during open
processing.
Force-close Switch
The requested processes are canceled and an response code is stored when
the Force-close Switch is used.
Note The Open Flag will not turn ON at all if a force-close request is made during
open processing.
Open, Send, or Receive
Request Switch
Close Request Switch
Response Code
Opening, Sending, or
Receiving Flag
Closing Flag
Open Flag
At least one PC cycle time be
tween response codes
Response code stored. Response code stored.
Request Switch
turned ON. Request
accepted.
Close Request
Switch turned ON.
Close request
accepted.
Not synced with
Request Switches.
Open, Send, or Receive
Request Switch
Force-close Switch
Response Code
Opening, Sending, or
Receiving Flag
Closing Flag
Open Flag
Response code stored.
Request Switch
turned ON. Request
accepted.
Force-close
Switch turned ON.
Close request
accepted.
Not synced with
Request Switches.