Ositech comm 614006-001 - Manual (Page 30)

3 - 10 Trumpcard Ethernet LAN
Section Three
Microsoft LAN Manager
To install Microsoft LAN Manager versions 2.0, 2.1 and 2.2, the
Trumpcard driver diskette contains the required files and directory
structure to allow the LAN Manager installer to import an OEM disk.
1. Begin installation of LAN Manager using SETUP from the LAN
Manager Installation diskettes.
2. When prompted to select the available Network adapter driver,
choose ‘Other Driver’ at the bottom of the screen.
3. When prompted, insert the Trumpcard driver diskette.
4. Select the ‘OSITECH TRUMPCARD’ from the menu.
5. Continue with installation until complete.
Your PROTOCOL.INI file in your LANMAN directory should appear as
follows:
[PROTMAN_MOD]
DRIVERNAME=PROTMAN$
[NETBEUI_NIF]
BINDINGS=OSITECH_MOD
[OSITECH_MOD]
DRIVERNAME=OTCETH$
In your CONFIG.SYS the following lines should be present:
DEVICE=C:\LANMAN\PROTMAN.DOS /I:C:\LANMAN
DEVICE=C:\LANMAN\OTCETH.DOS
In your AUTOEXEC.BAT file the following line should appear
C:\LANMAN\NETBIND
Note: Keyword specifications associated with the NDIS driver are explained
in Appendix B, Error Messages in Appendix C.
Microsoft Windows for Workgroups
To install Microsoft Windows for Workgroups (WFW) versions 3.1 and
3.11, the Trumpcard driver diskette contains the required files to allow the
WFW installer to import an OEM disk.
1. Run the Windows for Workgroups installation according to the
manual provided.