Ositech comm 614006-001 - Manual (Page 44)

4 - 2 Trumpcard Ethernet LAN
Section Four
APPENDIX A – ODI Keywords
The following ODI keywords are supported by the Trumpcard ODI
drivers. The keywords must be in the NET.CFG file under the line LINK
DRIVER OTCETH and must be indented in by at least one space. If the
keyword is not present, the default value shown will be assumed.
FRAME < frame type >
Description: Frame type used by the driver
Default: Ethernet_802.2
Accepted values: Ethernet_802.3 , Ethernet_II , Ethernet_SNAP,
Ethernet_802.2
Note: Make sure the frame type matches that used by the server.
MEDIA <media type>
Description: Media type selected by the driver
Default: AUTO
Accepted Values: 10BASE2 or BASE2, 10BASET or BASET, AUTO
Note: If you are using the dual media Trumpcard network PC Card, setting
this keyword to 10Base2 or 10BaseT will force that media type
connection only. By default, the driver will try to determine which
media is connected by first trying 10BaseT, and then 10Base2.
EXCLUSIVE
Description: Put Trumpcard in LAN only mode
Default: Multi-mode
Note: If the Trumpcard is a multi-function card, specifying this keyword will
disable the other function as long as the network driver is loaded. If
the other function is already in use the driver will report an error.
DISLINK
Description: Disable link poll mode
Default: Enable link