Ositech comm 614006-001 - Manual (Page 41)

User’s Guide and Reference 3 - 21
Operation
$ su
enter the root password at the Password: prompt
# cd /tmp
# pkgadd -d diskette1
Then simply follow the instructions provided by the installation script to
complete the installation of the driver.
SCO UNIX LLI Driver
The Trumpcard LLI Driver is a Network driver and enabler for Intel,
Databook and compatible PCMCIA equipped computers. With this driver
installed networking functions will be available under SCO UNIX.
The Trumpcard LLI driver requires that the Trumpcard PC Card be
inserted prior to the driver being loaded. If no Trumpcard is found, the
driver will not be loaded and networking functions will NOT be available.
When the driver has successfully loaded, unpredictable results will occur if
the Trumpcard is now removed from the PCMCIA slot. The Trumpcard LLI
Driver DOES NOT support hot insertion and removal.
To install the Trumpcard LLI driver, you need to create an Ositech LLI
Driver Disk using the INSTALL shell script from the DOS formatted
Network Drivers distribution diskette provided with the adapter. The first
step is to copy the INSTALL shell script to the UNIX /tmp directory from the
distribution diskette \UNIX\SCO directory. If you do not have the DOS file
system support installed on your UNIX system, then you must also copy
the osi_sco.tar file to the /tmp directory. If you wish to install the DOS file
system support, then execute the UNIX command “mkdev dos” as the
root user, and reboot your machine.
The installation process performed by the INSTALL shell script consists
of three basic steps:
1) Creating the Ositech LLI Driver Disk from the compressed
disk image extracted from the osi_sco.tar archive.
2) Second, installing the driver from the Ositech LLI Driver Disk
using the custom utility.
3) Binding the Network software to the Trumpcard driver using
netconfig.
Note: If the Trumpcard is a Multi-Function PC Card additional steps may be
required to complete the full installation. Refer to the Installation Guide
accompanying the PC Card for more details.
In order to successfully complete the installation process the following is
required: