Ositech comm 614006-001 - Manual (Page 37)

User’s Guide and Reference 3 - 17
Operation
Netware NETX
For Netware using NETX.EXE, the Trumpcard ODI driver must be
installed manually by copying the Trumpcard ODI driver
(OTCETH.COM) to the directory containing the workstation software.
The Trumpcard ODI driver is located in the \NETWARE\DOS
subdirectory on the Trumpcard driver diskette. In order to configure the
Trumpcard ODI driver, a NET.CFG file must be created; refer to
Appendix A for ODI keywords.
Netware VLM
For Netware using VLM.EXE the Trumpcard ODI driver can be installed
automatically by using the Netware Client diskettes.
1. Follow the instructions in the Workstation Basics and Installation
for adapter installation using the ‘Netware Client Install’. Any
references to an ADAPTER OPTION DISKETTE means the
Trumpcard driver diskette provided with the PC Card.
2. Proceed through steps 1, 2, and 3 of the Netware Client Install
making any changes as required.
3. At STEP 4 of the Netware Client Install, press [ENTER] to
install the Netware adapter driver.
4. When prompted to insert the adapter diskette, follow the
instructions and Remove the Netware Client Installation
Diskette from the drive. Insert the Trumpcard driver diskette.
Press [ENTER].
5. Follow the instructions to select the Trumpcard ODI driver and
configure the driver as required.
6. At STEP 5 press [ENTER] to install the Client software on the
workstation.
End of Installation.