Ositech comm 614006-001 - Manual (Page 33)

User’s Guide and Reference 3 - 13
Operation
Microsoft Windows NT 3.5
The Trumpcard Windows NT 3.5 NDIS3.0 driver is a Network driver and
enabler for Intel, Databook and compatible PCMCIA equipped computers.
With this driver installed, networking functions will be available under
Windows NT 3.5.
The Trumpcard Windows NT 3.5 driver requires that the Trumpcard PC
Card be inserted prior to the driver being loaded. If no Trumpcard is
found, the driver will not be loaded and networking functions will NOT be
available. When the driver has successfully loaded, if the Trumpcard is
now removed from the PCMCIA slot unpredictable results will occur. The
Trumpcard Windows NT 3.5 Driver DOES NOT support hot insertion and
removal (hot swapping).
To install the Trumpcard NDIS3.0 Network driver for Windows NT 3.5, the
Trumpcard Network Drivers diskette contains the required files to allow
Windows NT installer to import an OEM disk.
1. From the Main Program Group select CONTROL PANEL, and then
NETWORK.
2. Choose ADD ADAPTER, then select <OTHER> from the Network
Adapter Card list of choices.
3. Select CONTINUE, when prompted, to insert the disk and to enter
a path name, place the Network Driver diskette into the floppy drive
and enter A:\WINNT35.
4. The default settings will work in most environments. Select
CONTINUE once finished configuring the LAN driver, select OK
once finished setting up the Network.
5. Restart the computer to allow loading the newly installed Network
driver.
Note: If the Trumpcard is a Multi-Function adapter, additional steps may be
required to complete the full installation. Refer to the Installation
Guide accompanying the adapter for more details.
Note: Keyword specifications associated with the NDIS driver are explained
in Appendix B, Error Messages in Appendix C.