Omron ETHERNET DIRECT DR 170 14 - Manual (Page 12)

Klinkmann Automation Omron Ethernet DAServer 10
Omron Ethernet DAServer Ver 1.x User Manual Rev 1.4 17014m14
When CX-Programmer establishes communication with PLC, select "Operating Mode"
(from PLC's menu) and set "Program" mode.
Note:
If you do not know (or have forgotten) the communication settings currently configured in
the PLC, the Auto Online feature can be useful – from CX-Programmer’s main menu
select “PLC/Auto Online/Auto Online” and CX-Programmer will search for all possible
settings until the proper ones are found; after that the current PLC program will be
automatically uploaded to CX-Programmer and it will go to online state with operating
mode set "Program" mode.
Double-click on "IO Table" in treeview. The "PLC IO Table - NewPLC1" dialog box
appears. Select "Options" and click "Transfer from the PLC":