Omron ETHERNET DIRECT DR 170 14 - Manual (Page 66)

Klinkmann Automation Omron Ethernet DAServer 64
Omron Ethernet DAServer Ver 1.x User Manual Rev 1.4 17014m14
data transfer between
the CPU unit and a
CPU Bus Unit). issue the ERROR
CLEAR command
0A An error occured during
CPU Bus Unit data
transfer. Check the Units and
cable connection and
issue the ERROR
CLEAR command DASProtFail
Note: Refer to FINS Command’s manual if face FINS error code missed in table.
(*) If face this type of error – contact Klinkmann Support (
[email protected] ),
because reason of problem could be caused by Omron Ethernet DAServer data
processing problems.