Tally Genicom MATRIX PRINTER 2250 - Manual (Page 132)

MTPL
IBM
XL24e
IBM
AGM
Epson
LQ-2550
Epson
LQ-2170
Code Function
✓ ✓ <ESC>?<s><n> Reload a graphics mode
✓ ✓ <ESC>@ Initialize printer
✓ ✽ ✽ ✽ ✽ <ESC>[ MTPL start character for programming sequence
✓ ✽ ✽ ✽ ✽ <ESC>[:y Right justification and centering OFF
✓ ✽ ✽ ✽ ✽ <ESC>[=z Bold ON
✓ ✽ ✽ ✽ ✽ <ESC>[>z Bold OFF
✓ ✽ ✽ ✽ ✽ <ESC>[?1~ MTPL command set
✓ ✽ ✽ ✽ ✽ <ESC>[?10~ Barcode interpretation OFF
✓ ✽ ✽ ✽ ✽ <ESC>[?11~ Start barcode interpretation
✓ ✽ ✽ ✽ ✽ <ESC>[?4~ MTPL + IBM Proprinter-24 command set
✓ ✽ ✽ ✽ ✽ <ESC>[?50h Selecting character sets with 256 characters
✓ ✽ ✽ ✽ ✽ <ESC>[?50l Selecting character sets with 94 characters
✓ ✽ ✽ ✽ <ESC>[?51h Proportional fonts automatic NLQ and LQ
✓ ✽ ✽ ✽ <ESC>[?51l Proportional fonts in draft mode possible (default)
✓ ✽ ✽ ✽ ✽ <ESC>[?52h Font selection (ESC[10...19m]) possible only for print quality NLQ/ LQ
✓ ✽ ✽ ✽ ✽ <ESC>[?52l Font selection (ESC[10...19m]) Draft possible (default)
✓ ✽ ✽ ✽ ✽ <ESC>[?53h Extended character set
✓ ✽ ✽ ✽ ✽ <ESC>[?53l Standard character set
✓ ✽ ✽ ✽ ✽ <ESC>[?6~ MTPL + EPSON LQ command set
✓ ✽ ✽ ✽ ✽ <ESC>[?7h Line overrun = CR + LF
BACK QUIT
?
PRINT
Reference manual Emulations
122