Tally Genicom MATRIX PRINTER 2250 - Manual (Page 76)

Parameter group Parameter Description
PapOpt
ASF-R
ASF-F
Trak2
Trak3
AutoTRA
AutoASF
ASF-R=installed*
ASF-R=not installed
ASF-F=installed
ASF-F=not installed*
Trac2=installed*
Trac2=not installed
Trac3=installed*
Trac3=not installed
AutoTRA=Off*
AutoTRA=T1=T2
AutoTRA=T1=T2=T3
AutoASF=Off*
AutoASF=On
Selection of the optional sheet feeders (ASF) and the optional tractors (see
paperways ).
ASF-R: Automatic sheet feeder at rear side of the printer
ASF-F: Automatic sheet feeder at front side of the printer
Trac2: Optional tractor at front side of the printer
Trac3: Optional tractor at rear side of the printer
If you set any of these options to Not installed, they will not be displayed in
the paper path quick selection menu.
If an optional tractor is installed and the Off parameter is active, only the
tractor selected (either via the menu or by means of an ESC sequence) is
supported. If the selected tractor is out of paper, printing is discontinued.
If an optional tractor is installed and T1=T2 is activated, the printer loads
paper from the other tractor if the selected one is out of paper.
If two optional tractors are installed, the same applies to three tractors with
the setting AutoTRA=T1=T2=T3.
If an automatic sheet feeder (ASF) is installed and the parameter
AutoASF=Off is active, only the paper bin selected (either via the menu or by
means of an ESC sequence) is supported. If the selected bin is out of paper,
printing is discontinued.
If an ASF is installed and AutoASF=On activated, the printer loads paper
from the other bin if the selected one is out of paper.
BACK QUIT
?
PRINT
Reference manual The Menu
66