Tally Genicom MATRIX PRINTER 2250 - Manual (Page 14)

Installation
➤
Unpacking the printer
Place your printer on a solid base (see Placing your
printer ).
Make sure that the “Up” symbols point to the correct
direction.
Open the packaging and take out the ribbon casset-
te. Pull the printer out of the cardboard box towards
you and remove the remaining packaging material.
Check the printer for any visible transport damage
and completeness. Apart from this CD-ROM (
➀ ), the
Operator’s Manual ( ➁ ), the power cable ( ➂ ), the rib-
bon ( ➃ ) and the paper support ( ➄ ) must be included.
If you find any transport damage or if any accesso-
ries are missing, please contact your dealer.
➀
➁
➂
➃
➄
BACK QUIT
?
PRINT
Reference manual Installation
4