Tally Genicom MATRIX PRINTER 2250 - Manual (Page 96)

BACK QUIT
?
PRINT
Reference manual Mechanical adjustments to the printer
86
➤ Physical left margin (Physlm)
Select the Physlm menu (2).
Setting otpions: 0 to 30 in 1/10 inch steps
Default setting: 0 1/10 inch
Permanent (physical) setting of the left margin. This parameter cannot
be changed by emulation-dependent margin settings. Margin setting
values entered by ESC sequences are added to the Physlm.
Note that this value is subtracted from the maximum printing width
of
8 or 13.6 inches.
Confirm your settings by pressing the Set key (1).
All parameters described in the Paphand group may also be de-
fined via an ESC sequence (see chapter
Emulations or the
Programmer’s Application Manual ).
Physlm
Online
Setup
Back Next
2 1 3 4
Physlm= 0/10" *
Online
Setup
Set < > Exit
2 1 3 4