Tally Genicom MATRIX PRINTER 2250 - Manual (Page 72)

Parameter group Parameter Description
Language English*
German
French
Italian
Spanish The menu can be shown in five languages on the LC display.
Paper Single
Tract1
ASF-R
ASF-F
Trac2
Trac3
Formlen
Lines
6
:
72*
:
132 Sets the form length via line formats.
Please note that the adjustment in Lines depends on the selected LPI. For
example 8 LPI at a selected line number of 96 lines results in a formlength of
12 inches (96 lines/[8lines/inch]) = 12 inches).
The adjustable range is from 1 to 22 inch, i.e. with 2LPI, from 2 to 44 lines
and with 12 LPI, from 12 to 264 lines.
If the form length is set it will not be changed by changing the LPI later on.
The adjustable range may also be set outside the specification of
the paper path used (see Technical Data,
Paper Specifications , or, if
you use an optional tractor or ASF, the corresponding paper specifi-
cations ). However, any settings outside of these specifications are
your own responsibility, and proper function is not guaranteed.
BACK QUIT
?
PRINT
Reference manual The Menu
62
Selects the paper parameters Formlen, FormAdj and Head (only if AGA =
Off!) separately for each paper source in the current menu (1 to
3 ).