Tally Genicom MATRIX PRINTER 2250 - Manual (Page 34)

Settings (I)
This section describes how to set the paper type, the character density
and the fonts.
➤ Paper path quick
selection You can change the paper type either from an application program, by
means of the paper path quick selection feature or in the Setup menu. In
this section, the quick selection feature is described; for detailed informa-
tion on how to make this setting via the Setup menu, refer to the section
The menu .
Make sure that the printer is in offline mode; press the Online key, if
necessary.
Press the Park key and follow the messages in the display. If fanfold
paper is loaded in the printer, it is fed to the tear position. The text Tear
paper off appears in the display. After tearing off paper, press any key.
If a single sheet is loaded in the printer, it is ejected.
Offline Tractor1
Park Load
Online
Setup
2 1 3 4
BACK QUIT
?
PRINT
Reference manual Settings (I)
24