Tally Genicom MATRIX PRINTER 2250 - Manual (Page 84)

➤
Interface test (Hex-Dump) With the interface test (Hex-Dump/H-Dump) you can test data trans-
mission from the computer to the printer. During this test, the data from
the computer is printed out in two columns. The text in the left column is
printed in hexadecimal format and in the right column in ASCII format.
Printout in Hex-Dump Put the printer into Test mode by pressing the key Online while switch-
ing on the printer.
Press the key Online until Test mode is shown on the display.
The display shows Test mode for approx. 1 second and then automat-
ically changes to display ASCII 80 ASCII 136.
Press the key Next, the display shows the next menu level.
ASCII80 ASCII136
Online
Setup
Back Next
2 1 3 4
BACK QUIT
?
PRINT
Reference manual Test functions
74