Technicolor - Thomson HP 270 - Manual (Page 25)

24
EN
VIDEO PLAYBACK (cont.)
NOTES:
● It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the
battery pack (
੬ pg. 10).
● To monitor the picture and sound from the
camcorder without inserting a tape or memory
card, set the camcorder’s Power Switch to “
”
or “ ”, then set your TV to the appropriate input
mode.
● Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camcorder is turned on.
● If you have a TV or speakers that are not specially
shielded, do not place the speakers adjacent to
the TV as interference will occur in the camcorder
playback picture.
● While the Audio/Video cable is connected to the
AV connector, sound cannot be heard from the
speaker.
1 Make sure all units are turned off.
2 Connect the camcorder to a TV or VCR as
shown in the illustration (
੬ pg. 23).
If using a VCR . . . go to step 3.
If not . . . go to step 4.
3 Connect the VCR output to the TV input,
referring to your VCR’s instruction manual.
4 Turn on the camcorder, the VCR and the TV.
5 Set the VCR to its AUX input mode, and set the
TV to its VIDEO mode.
To choose whether or not the following displays
appear on the connected TV . . .
•Date/Time
.... set “DATE/TIME” to “AUTO”, “ON” or “OFF”
in the Menu Screen ( ੬ pg. 43, 44).
•Time Code
.... set “TIME CODE” to “ON” or “OFF” in the
Menu Screen ( ੬ pg. 43, 44).
•Playback Sound Mode, Tape Speed And Tape
Running Displays for video playback
Or
Type of file, Directory/File Names and Image
Number/Total Number of Images for D.S.C.
Playback
.... set “ON SCREEN” to “LCD” or “LCD/TV” in
the Menu Screen ( ੬ pg. 43, 44).
Or, press DISPLAY on the remote control.
Docking Station Attachment
First align the multi connector and screw on the
Docking Station with the camcorder’s multi
connector and tripod mounting socket and tighten
the screw.
When removing the camcorder, loosen the screw
and detach the camcorder.
NOTE:
While the Docking Station is attached to the
camcorder, it is not possible to load and unload
the memory card. Also, connecting and discon-
necting the DV cable are not possible. Tripod mouting
socket
Screw
Multi connector