Technicolor - Thomson HP 270 - Manual (Page 36)

EN
35
– DPOF
AL L
SELECT
RESET
AL L –
EXECUTE
CANCEL
DPOF
Setting Print Information (DPOF Setting)
This camcorder is compatible with the DPOF (Digital
Print Order Format) standard in order to support future
systems such as automatic printing, which records
information about the still images you wish to print (such
as the number of prints to make). There are 2 print
information settings available: “To print all still images
(one print for each)” explained below and “To print by
selecting still images and no. of prints” (
੬ pg. 36).
TO PRINT ALL STILL IMAGES (ONE PRINT
FOR EACH)
1 Set the VIDEO/MEMORY Switch to “MEMORY”,
then set the Power Switch to “
” while pressing
down the Lock Button located on the switch. Open
the LCD monitor fully or pull out the viewfinder
fully.
2 Press MENU. The Menu Screen appears.
3 Press + or – to select “ MEMORY” and press SET/
SELECT. The MEMORY Menu appears.
4 Press + or – to select “DPOF” and press SET/SELECT.
The Sub Menu appears.
5 Press + or – to select “ALL” and press SET/SELECT.
Selection is complete. The Confirmation Screen
appears.
6 Press + or – to select “EXECUTE” and press SET/
SELECT. The normal playback screen appears.
•To cancel selection, press + or – to select “CAN-
CEL” and press SET/SELECT.
To Reset The Setting . . .
.... select “RESET” in step 5. The setting is reset to 0 for
all still images.
DPOF Menu
Display
Confirmation
Screen
Power Switch
MENU Button
Lock Button
VIDEO/MEMORY
Switch
SET/SELECT
Button
+, – Button