Symptom possible causes corrective action – Technicolor - Thomson HP 270 User Manual

Page 80

Advertising
background image

EN

79

SYMPTOM

POSSIBLE CAUSES

CORRECTIVE ACTION

22. Even when Slow Shutter is

not selected, the image looks
like it is activated.

23. There is no strobe when the

Classic Film or Strobe mode
is activated.

24. White Balance cannot be

activated.

25. When shooting a subject

illuminated by bright light,
vertical lines appear.

26. When the screen is under

direct sunlight during
shooting, the screen becomes
red or black for an instant.

27. During recording, the date/

time does not appear.

28. Files stored in the memory

card cannot be deleted.

29. The indicators and messages

do not appear.

30. Images on the LCD monitor

appear dark or whitish.

31. The rear of the LCD monitor

is hot.

32. The indicators and the image

colour on the LCD monitor
are not clear.

22. • When shooting in the dark,

the unit becomes highly
sensitive to light and the
image takes on an effect
similar to Slow Shutter.

23. • The Picture Wipe or Dissolve

function is in use.

24. • The Sepia or Monotone mode

is activated.

25. • This is a result of exceedingly

high contrast, and is not a
malfunction.

26. • This is not a malfunction.

27. • “DATE/TIME” is set to “OFF”

in the Menu Screen.

28. • Files stored in the memory

card are protected.

29. • “TIME CODE” is set to “OFF”

in the Menu Screen.

30. • In places subject to low

temperature, images become
dark due to the characteristics
of the LCD monitor. When
this happens, the displayed
colours differ from those that
are actually recorded. This is
not a defect of the camcorder.

• When the LCD monitor's

fluorescent light reaches the
end of its service life, images
on the LCD monitor become
dark. Consult your nearest
THOMSON dealer.

31. • The light used to illuminate

the LCD monitor causes it to
become hot.

32. • This may occur when the

surface or the edge of the LCD
monitor is pressed.

22. • If you want the lighting to

look more natural, set “GAIN
UP” to “AGC” or “OFF” in the
Menu Screen (

੬ pg. 40).

23. • Do not try to use the Classic

Film or Strobe mode during a
scene transition (

੬ pg. 47,

49).

24. • Turn off Sepia or Monotone

before setting White Balance
(

੬ pg. 48, 54).

25.

————

26.

————

27. • Set “DATE/TIME” to “ON” in

the Menu Screen (

੬ pg. 42).

28. • Remove protection from the

files stored in the memory
card and delete them
(

੬ pg. 32 – 34).

29. • Set “TIME CODE” to “ON” in the

Menu Screen (

੬ pg. 42, 43).

30. • Adjust the brightness and

angle of the LCD monitor
(

੬ pg. 19, 20).

31. • Close the LCD monitor to turn

it off or set the Power Switch
to “OFF”, and let the unit cool
down.

32.

————

CONTINUED ON NEXT PAGE

Advertising