Technicolor - Thomson HP 270 - Manual (Page 60)

EN
59
COPY OF F
ON
–
SP 6
Play/Pause
Button (4/6)
Display
Power Switch
SNAPSHOT Button
Dubbing Still Images Recorded On A Tape
To A Memory Card
Still images can be dubbed from a tape to a memory
card.
1 Load a memory card ( ੬ pg. 15) and cassette
( ੬ pg. 13).
2 Select the Snapshot mode in the Menu Screen
(
੬ pg. 27) to use for dubbing the image to the
memory card.
3 Set the VIDEO/MEMORY Switch to “VIDEO”, then
set the Power Switch to “
” while pressing down
the Lock Button located on the switch.
4 Press MENU. The Menu Screen appears. Press + or –
to select “
VIDEO” and press SET/SELECT. The
VIDEO Menu appears.
5 Press + or – to select “ COPY” and press
SET/SELECT. The Sub Menu appears. Press + or – to
select “ON” and press SET/SELECT. Selection is
complete.
6 Press + or – to select “ RETURN” and press SET/
SELECT twice. The normal playback screen resumes.
7 To select a still image to be dubbed, start playback
by pressing 4/6. At the moment you find the
image you wish to dub, press it again to engage Still
Playback.
8 To start dubbing, press SNAPSHOT. The selected
image is stored in the memory card.
•“
” blinks during dubbing.
NOTES:
● If SNAPSHOT is pressed in step 8 when a memory card
is not loaded, the message “COPYING FAILED” is
displayed.
● If an image recorded on the tape using the WIDE mode
(
੬ pg. 41) is dubbed to a memory card, the WIDE
mode identifying signal is not dubbed with it.
● To use Playback Special Effects with a video image you
wish to dub, perform up to step 8 using the remote
control (provided) (
੬ pg. 64).
● Images are dubbed in VGA file size.
MENU Button
Lock Button
VIDEO Menu
VIDEO/MEMORY
Switch
SET/SELCT
Button
+, – Button