Technicolor - Thomson HP 270 - Manual (Page 43)

42
EN
NOTES:
● The “ CAMERA” settings are effective when the Power Switch is set to both “ ” and “ ”.
● The “ MANUAL” settings are effective only when the Power Switch is set to “ ”.
● “ SYSTEM” and “ DISPLAY” functions which are set when the Power Switch is set to “ ” are also
applied when the Power Switch is set to “ ” ( ੬ pg. 43). “CLOCK ADJ.” only appears when the Power
Switch is set to “ ”.
● The “ DISPLAY” settings are effective even when the Power Switch is set to “ ”.
● The “ON SCREEN” setting can also be changed by pressing the DISPLAY Button on the remote control
(provided) (
੬ pg. 24, 57, 69).
: Factory-preset
DATE/
TIME
TIME
CODE
CLOCK ADJ.
LCD
LCD/TV
OFF
AUTO
ON
OFF
ON
SOUND
IN
CAM
RESET
ON
SCREEN
DISPLA
Y
SYSTEM
CANCEL
EXECUTE
/
DSC
QUALITY
IMAGE SIZE
REC
SELECT
MIC
D.SOUND
Does not reset all settings to the factory-preset.
Resets all settings to the factory-preset.
Enables sound input from camcorder’s stereo microphone, when Audio
Dubbing (
੬ pg. 65) is executed. “MIC” appears on the Audio Dubbing
screen.
Enables sound effect input recorded on the provided memory card, when
Audio Dubbing (
੬ pg. 66) is executed. “D. SOUND” appears on the Audio
Dubbing screen.
Keeps the camcorder’s display (except the date, time and time code) from
appearing on the connected TV screen.
Makes the camcorder’s display appear on screen when the camcorder is
connected to a TV.
The date/time does not appear.
Displays the date/time for approx. 5 seconds in the following cases:
•When the Power Switch is set from “OFF” to “
” or “ ”.
•When playback starts. The camcorder displays the date/time when scenes
are recorded.
•When the date is changed during playback.
The date/time is always displayed.
Time code is not displayed.
Time code is displayed on the camcorder and on the connected TV. Frame
numbers are not displayed during recording.
Allows you to set the current date and time ( ੬ pg. 12).
Allows you to set the Picture Quality mode (FINE and STANDARD)
depending on your preference (
੬ pg. 16).
Allows you to set the Image Size mode (XGA and VGA) depending on your
preference (
੬ pg. 16).
When Snapshot recording is performed with the VIDEO/MEMORY Switch
set to “VIDEO”, still images are recorded only onto the tape.
When Snapshot recording is performed with the VIDEO/MEMORY Switch
set to “VIDEO”, still images are recorded not only onto the tape but also in
the memory card.
USING MENUS FOR DETAILED ADJUSTMENT (cont.)